22/18 mm black genuine leather crocodile-style deployment type strap with red stitching to fit TAG Heuer Monaco LS & 24 models - please read clasp fitment notes

22/18 mm black crocodile-style genuine leather deployment type strap with red stitching to fit TAG Heuer Monaco LS & 24 watches with model numbers listed below:

CAL21111	CAL2113	CAL5110
CAL5111	CAL5112	CAL5113

If you are unsure of where to find the model number of your watch or clasp, please see here.

This strap will also fit any other Monaco models AS LONG AS they are fitted with one of the deployment clasps listed below.

The stitching on this strap is designed to complement the orange and light blue Gulf colours on the face of the Monaco 24 Gulf Edition (CAL5110).

The straps are 22 mm wide at the watch end, tapering down to 18 mm at the clasp end. Lengths are 104 mm & 84 mm respectively. Thickness is approximately 7.0 mm at the watch end and 3.0 mm at the clasp. The straps are custom made of genuine calf leather with black leather lining.

We offer a twelve-month replacement guarantee on these straps - if the strap is defective in any way, simply return it to us and we will send you a replacement free of charge.

VERY IMPORTANT: Please read the following information before placing your order:

1. A clasp is NOT included with this strap. You need to transfer the deployment clasp over from your old strap.

2. PLEASE CHECK the model number of your deployment clasp. It is marked on the clasp itself, usually on one of the deployment arms, and will start with the letters FC. The markings are quite small so you need to look closely - and remember to look on both sides of the arms. ALL genuine TAG Heuer clasps have a model number marked on them. This strap is ONLY compatible with the following clasp model numbers:

FC5037	FC5039	FC5040	FC5041	FC5043	FC5049	FC5055	FC5056	FC5059
FC5062	FC5064	FC5065	FC5066	FC5068	FC5069	FC5071	FC5072

All other TAG Heuer clasps have a lower clasp clamp height (2 mm vs 3 mm for those listed above), and this strap will not fit through their clasp clamps as a result.

3. If your watch currently has a metal bracelet you will need a new deployment clasp, as the clasp from a metal bracelet cannot be used with a leather strap. Suitable clasps can be found here and here.

4. This strap CANNOT be used with a pin buckle, as it has neither holes, loops nor a cutout for the pin.