22/18 mm short white genuine leather crocodile-style deployment type strap with white stitching to fit TAG Heuer Monaco models listed below - please see clasp fitment notes

A short white crocodile-style genuine leather strap with white stitching to fit the following TAG Heuer Monaco models:

CAW2110	CAW2111	CAW2112	CAW2113	CAW2114	CAW2115	CAW2116	CAW2117
CAW2118	CAW2119	CAW211A	CAW211B	CAW211C	CAW211D	CAW211E	CAW211J
CAW211K	CAW211P	CAW211R	CAW211T	CAW211U	CAW211V	CAW211W	CAW211X
CAW211Y	CAW211Z	CW2110	CW2111	CW2112	CW2113	CW2114	CW2115
CW2116	CW2117	CW2118	CW2119	CAW211A	WAW1310	WAW1313	WAW1315
WAW1316	WAW131A	WAW131B	WAW131C	WAW131E	WW2110	WW2111	WW2112
WW2113	WW2114	WW2115	WW2116	WW2117	WW2118	WW2119

The straps measure 22 mm wide at the watch end, tapering down to 18 mm at the clasp end. Thickness is approximately 5.2 mm at the watch end and 2 mm at the clasp. Lengths are 88 mm & 74 mm respectively. The straps are custom made of genuine leather with an embossed crocodile skin pattern and beige suede lining.

We offer a twelve-month replacement guarantee on these straps - if the strap is defective in any way, simply return it to us and we will send you a replacement free of charge.

VERY IMPORTANT: Please read the following information before placing your order:

1. A clasp is NOT included with this strap. You need to transfer the deployment clasp over from your old strap.

2. PLEASE CHECK the model number of your deployment clasp. It is marked on the clasp itself, usually on one of the deployment arms, and will start with the letters FC. The markings are quite small so you need to look closely - and remember to look on both sides of the arms. ALL genuine TAG Heuer clasps have a model number marked on them. This strap is ONLY compatible with the following clasp model numbers:

FC5014	FC5015	FC5016	FC5023	FC5027	FC5028
FC5030	FC5034	FC5035	FC5036	FC5038	FC5042
FC5050	FC5052	FC5057	FC5057	FC5071	FC5075

The clasps listed above are 18 mm wide and are designed for a strap with a maximum thickness of 2 mm where it passes through the clasp clamp.

3. If your watch currently has a metal bracelet you will need a new deployment clasp, as the clasp from a metal bracelet cannot be used with a leather strap. Suitable clasps can be found here and here.

4. This strap CANNOT be used with a pin buckle, as it has neither holes, loops nor a cutout for the pin.