20/18 mm brown crocodile-style genuine leather deployment type strap with white stitching to fit TAG Heuer Grand Carrera models listed below - please read clasp fitment notes

Color: Brown with white stitching
Brown crocodile style genuine leather strap with white stitching to fit the following Grand Carrera models requiring a strap 20 mm wide between the lugs:

* WAV511A

* WAV511B

* WAV511C

* WAV511E

VERY IMPORTANT: Please read the following information before placing your order:

1. A clasp is NOT included with this strap. You need to transfer the deployment clasp over from your old strap.

2. PLEASE CHECK the model number of your deployment clasp BEFORE ordering. It is marked on the clasp itself, usually on one of the deployment arms, and will start with the letters FC. The markings are quite small so you need to look closely - and remember to look on both sides of the arms. ALL genuine TAG Heuer clasps have a model number marked on them. This strap is ONLY compatible with the following clasp model numbers:

- FC5014
- FC5015
- FC5016
- FC5023
- FC5027
- FC5028
- FC5030
- FC5034
- FC5035
- FC5036
- FC5038
- FC5042
- FC5050
- FC5052
- FC5057

3. If your watch currently has a metal bracelet you will need a new deployment clasp, as the clasp from a metal bracelet cannot be used with a leather strap. Suitable clasps can be found under the Clasp & Buckles category.

4. This strap CANNOT be used with a pin buckle, as it has neither holes, loops nor a cutout for the pin.

The straps are 20 mm wide at the watch end, tapering down to 18 mm at the clasp end. Lengths are 105 mm & 85 mm respectively. Maximum thickness at the watch end is approximately 5.8 mm, tapering down to 2 mm at the clasp end. The straps are custom made of genuine leather, with beige suede lining.

A clasp is NOT included with the strap. These straps are only suitable for use with the original TAG Heuer deployment clasp, which must be transferred over from the old strap. If you do not have a deployment clasp we can supply a generic equivalent for use with the strap, please see under our clasp listings.

IMPORTANT: Please note the following:

1. This strap is NOT compatible with the TAG Heuer clasp model numbers FC5037 & FC5039 - please check your clasp number before ordering.

2. This strap is NOT suitable for use with a pin buckle, as it has neither holes, loops nor a cutout for the pin.

We offer a twelve-month replacement guarantee on these straps - if the strap is defective in any way, simply return it to us and we will send you a replacement free of charge.