20/18 mm dark brown buffalo grain genuine leather strap with brown stitching & orange lining to fit TAG Heuer 300SLR CAR2112 models - please read clasp fitment notes

Color: Dark brown with brown stitching

Dark brown buffalo grain genuine leather sports perforated strap with brown stitching & orange lining to fit TAG Heuer 300SLR watches with the model number CAR2112. The strap is equivalent to the original TAG Heuer reference number FC6267, although we think our version is nicer, as the end is curved to follow the watch case rather than straight like the original.

The strap will also fit the following TAG Heuer Carrera & Grand Carrera models:

CAR2110	CAR2111	CAR2112	CAR2114	CAR2115	CAR2116	CAR2150	CAR2151	CAR2810	CAR2811
CAS201A	CAS201C	CAS201D	CAS2110	CAS2111	CAS2112	CAS2113	CAS2114	CAS2115	CAS2150
CAV518B	CAV518C	CAV518D	CAV518E	CAV518G	CAV518H	CAV518J	CAV518K	CBK2110	CBK2112
CBK2113	CBK2114	CBK2115	CBK2116	CBM2110	CBM2112	CV2010	CV2011	CV2012	CV2013
CV2014	CV2015	CV2016	CV2017	CV2018	CV2019	CV201AD	CV201AE	CV201AG	CV201AH
CV201AJ	CV201AK	CV201AR	CV201C	CV201F	CV201H	CV201K	CV201N	CV201Q	CV201S
CV201T	CV201Y	CV2050	CV2119	CV211A	CV211D	CV211E	CV5110	CV5111	WAR2010
WAR2011	WAR2012	WAR201A	WAR201B	WAR201C	WAR201D	WAR5010	WAR5011	WAR5012	WAR5013

If you are unsure of where to find the model number of your watch or clasp, please see here.

The straps are 20 mm wide at the watch end, tapering down to 18 mm at the clasp end. Lengths are 105 mm & 85 mm respectively. Thickness is approximately 6.5 mm at the watch end and 3 mm at the clasp end.

The straps are custom made of genuine leather with orange leather lining.

We offer a twelve-month replacement guarantee on these straps - if the strap is defective in any way, simply return it to us and we will send you a replacement free of charge.

VERY IMPORTANT: Please read the following information before placing your order:

1. A clasp is NOT included with this strap. You need to transfer the deployment clasp over from your old strap.

2. PLEASE CHECK the model number of your deployment clasp. It is marked on the clasp itself, usually on one of the deployment arms, and will start with the letters FC. The markings are quite small so you need to look closely - and remember to look on both sides of the arms. ALL genuine TAG Heuer clasps have a model number marked on them. This strap is ONLY compatible with the following clasp model numbers:

FC5037	FC5039	FC5040	FC5041	FC5043	FC5049	FC5055	FC5056	FC5059
FC5062	FC5064	FC5065	FC5066	FC5068	FC5069	FC5071	FC5072

All other TAG Heuer clasps have a lower clasp clamp height (2 mm vs 3 mm for those listed above), and this strap will not fit through their clasp clamps as a result.

3. If your watch currently has a metal bracelet you will need a new deployment clasp, as the clasp from a metal bracelet cannot be used with a leather strap. Suitable clasps can be found here and here.

4. This strap CANNOT be used with a pin buckle, as it has neither holes, loops nor a cutout for the pin.