21.5 mm Black fabric strap with blue stitching and lining to fit TAG Heuer Aquaracer models listed below - please read clasp fitment notes

PLEASE NOTE: some of the models listed above are fitted with stainless steel bracelets as standard. If you wish to fit this strap you will also need a new 3 mm deployment clasp. Suitable clasps can be found here and here.

VERY IMPORTANT: Please read the following information before placing your order:

1. A clasp is NOT included with this strap. You need to transfer the deployment clasp over from your old strap.

2. PLEASE CHECK the model number of your deployment clasp. It is marked on the clasp itself, usually on one of the deployment arms, and will start with the letters FC. The markings are quite small so you need to look closely - and remember to look on both sides of the arms. ALL genuine TAG Heuer clasps have a model number marked on them. This strap is ONLY compatible with the following clasp model numbers - all other TAG Heuer clasps have a lower clasp clamp height (2 mm vs 3 mm for those listed below), and this strap will not fit through their clasp clamps as a result:

3. If your watch currently has a metal bracelet you will need a new deployment clasp, as the clasp from a metal bracelet cannot be used with a leather strap. Suitable clasps can be found under the Clasp & Buckles category.

4. This strap CANNOT be used with a pin buckle, as it has neither holes, loops nor a cutout for the pin.

We offer a twelve-month replacement guarantee on these straps - if the strap is defective in any way, simply return it to us and we will send you a replacement free of charge.